The new versions of PLEDIN are led ceiling of EuLux with innovative electronics which further reduces the consume (up to 75% less) for the same brightness.

On the market there is nothing comparable in any way (with only the 20watt pledin020 you can replace a 4×18 with neon). Simple but extremely functional.

The right solution for those who must illuminate and also meet aesthetic requirements.

Customers tend to use LED tubes and insert them in neon ceiling lights, replacing the classic neon, with adaptation cabling. As you can read from the PDF and from the following link, this technique causes  to be lost the CE certification into the ceiling light:

Lampade a LED con attacco G5 e G13: rischi e responsabilità (ASSIL – TECHNICAL STATEMENT)


Technical specifications

Body: Realized in aluminum with low copper content;

Power: 110-270Vac, efficiency 94%, PFC>0,95, IP65 CLASS I and II+T;

Color Temperature: 5000°K (choice of 3000°, 4000° K);

Mounting: Recessed in to square 60x60cm (Or surface mounted with the use of OpSP);

Photobiological safety: Conforms to the group of risk-free RG0, IEC 62471;

Glass: Screen Polycarbonate 10-year warranty against yellowing, IK08;

LED efficiency: 166 lm/watt guaranteed minimum at 85°;

Reference standards

  • 2011/65/CE
  • 2006/95/CE
  • 2004/108/CE

Conforme al gruppo di rischio esente RG=0;norma IEC 62471;

  • EN 60598-1
  • EN 62471
  • EN 55015
  • EN 61547
  • EN 61000-3-2
  • EN 61000-3-3
  • UNI EN 12464-1


Photometrics now available

Structure  colors surface mounted available


Power consumption 20Watt
Number of LED* 8
Luminous intensity on the LED 3320 lm
Weight** 2,4 Kg


Power consumption 30Watt
Number of LED* 12
Luminous intensity on the LED 4980 lm
Weight** 2,7 Kg


Power consumption 40Watt
Number of LED* 16
Luminous intensity on the LED 6640 lm
Weight** 2,9 Kg

* This value may be subject to change without notice, so please ask for confirmation when ordering.

** +/- 5%.

OpLUCO: Sistema elettronico di controllo per autoregolazione dell’illuminazione a LED;

OpCE1: Kit d’emergenza per lampade a LED;

OpSP: struttura per montaggio a pilone;

OpDALI: sistema elettronico di controllo dell’illuminazione a LEd con protocollo standard DALI;

OpINLUX: Predisposizione per regolatore di flusso e/o telecontrollo PITECO;